产品
产品中心
< 返回主菜单
产品

交换机

交换机所有产品
< 返回产品
交换机
查看交换机首页 >

无线

无线所有产品
< 返回产品
无线
查看无线首页 >

云桌面

云桌面产品方案中心
< 返回产品
云桌面
查看云桌面首页 >

安全

安全所有产品
< 返回产品
安全
查看安全首页 >
产品中心首页 >
行业
行业中心
< 返回主菜单
行业
行业中心首页 >

【交换机】show version查看不到线卡信息,状态是resetting的故障处理

发布时间:2013-09-23
点击量:2910

1)现象

Ruijie#show ver slo

  Dev Slot Port Configured Module            Online Module                User Status  Software Status

  --- ---- ---- ---------------------------- ---------------------------- ------------ ---------------

  1   1    24   M8600-24GT/12SFP             M8600-24GT/12SFP             installed    ok            

  1   2    0    M8600-NMM                    none                         installed    resetting     

  1   3    0    none                         none                         none         none          

  1   4    0    none                         none                         none         none          

  1   M1   0    N/A                          none                         N/A          none          

  1   M2   0    N/A                          M8606-CM II                  N/A          master        

2)原因

resetting的状态,主要是线卡自身的程序丢失,或者升级出现异常,或者是管理板上与线卡的程序存在不一致,导致管理板无法驱动线卡导致的。

3)解决方法

a.可以尝试 Ruijie#reset module 2         //重置该槽位的线卡,建议耐心等待几分钟

b.或者在debug support模式下强制同步程序到线卡,建议耐心等待几分钟

Ruijie#debug support

Ruijie(support)#upgrade force slot ?

  <1-30>  Specify user slot ID to upgrade images

  WORD    Specify Board(M1|M2) to upgrade images

  all     Force to upgrade all slots if card inside

Ruijie(support)#upgrade force slot 2

Card in slot 2 is invalid.

Ruijie(support)#

c.如果出现方法2中的提示Card in slot 2 is invalid.,那么可以尝试在ctrl层下强制同步线卡

Ctrl>upgrade

Usage: upgrade -slot <all | 1..30 | M1 | M2> [-type <boot | ctrl | main>] [-force]

Ctrl>upgrade -slot 2 -type boot -force    //强制同步boot程序到线卡

These images in linecard will be updated:

    Slot    image    linecard

    ----    -----    ----------------

       2    BOOT           M8600-NMM

/-------------同步日志省略------------/

(Slot 2): Install finish in slot 2 (M8600-NMM).

Ctrl>upgrade -slot 2 -type ctrl -force     //强制同步ctrl程序到线卡

These images in linecard will be updated:

    Slot    image    linecard

    ----    -----    ----------------

       2    CTRL           M8600-NMM

/-------------同步日志省略------------/

(Slot 2): Install finish in slot 2 (M8600-NMM).

Ctrl>upgrade -slot 2 -type main -force     //强制同步main程序到线卡

These images in linecard will be updated:

    Slot    image    linecard

    ----    -----    ----------------

       2    MAIN           M8600-NMM

/-------------同步日志省略------------/

(Slot 2): Install finish in slot 2 (M8600-NMM).

Ctrl>version                   //确认版本线卡识别成功,信息同步一致

Module information:

  Slot-1 : M8600-24GT/12SFP

    Hardware version : 1.0

    BOOT version     : 10.4  Release (78635)

    CTRL version     : 10.4  Release (78635)

  Slot-2 : M8600-NMM

    Cpu 0:

    Hardware version : 1.0

    Original main file version : RGOS 10.4(2b3) Release(100306)

    BOOT version     : 10.4  Release (100306)

    CTRL version     : 10.4  Release (100306)

    Cpu 1:

    Hardware version : 1.0

    Original main file version : RGOS 10.4(2b3) Release(100306)

    BOOT version     : 10.4  Release (100306)

    CTRL version     : 10.4  Release (100306)

  Slot-M2 : M8606-CM II

    Hardware version : 1.5

    Original main file version : RGOS 10.4(2) Release(76696)

    BOOT version     : 10.4  Release (76696)

    CTRL version     : 10.4  Release (76696)

Ctrl>reload          //整机重启

 

相关产品

返回顶部

请选择服务项目
关闭咨询页
售前咨询 售前咨询
售前咨询
售后服务 售后服务
售后服务
意见反馈 意见反馈
意见反馈
更多联系方式