【无线】无线ROM层升级方式

发布时间：2013-09-07

点击量：4135

一、组网需求

对无线设备（ac或ap）软件版本升级，一般在设备主程序丢失的情况下使用。

二、组网拓扑

三、配置要点

关闭电脑的杀毒软件和防火墙

保证电脑的tftp端口不被其他进程占用

软件版本完整，可登陆锐捷官网下载http://www.ruijie.com.cn/service/download.aspx

传输软件版本过程中不可断电或重启

四、配置步骤

1、参照“设备维护管理”中的“Console方式登陆”登陆设备，把软件版本和tftp软件放在一个目录中，打开tftp软件。

2、重启无线设备，根据提示按住ctrl并不断地按C进入ROM层。

ROM层菜单

====== BootLoader Menu("Ctrl+Z" to upper level) ======

************************************************

TOP menu items.

************************************************

0. Tftp utilities.

1. XModem utilities.

2. Run Main.

3. Run an Executable file.

4. File management utilities.

5. SetMac utilities.

6. Scattered utilities.

************************************************

Press a key to run the command:

3、在ROM模式下，按ctrl+Q从菜单模式进入到命令行模式，进入以下模式

BootLoader>

4、在无线设备上拷贝升级包进行版本升级，假设电脑的IP地址是192.168.1.2

BootLoader>tftp 192.168.0.1 192.168.0.2 rgos.bin -main ------> 输入升级命令

注释：其中192.168.0.1 为用户定义的设备IP，192.168.0.2 是电脑IP地址，rgos.bin 为PC上主程序的文件名，-main 作为主程序

以下是正常时整个文件传输过程的日志，请参考：

Now, begin download program through Tftp...

Host IP[192.168.0.2] Target IP[192.168.0.1] File name[rgos.bin]

%Now Begin Download File rgos.bin From 192.168.0.2 to 192.168.0.1

send download request.

send download request.!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

%Mission Completion. FILELEN = 7952864

Tftp download OK, 7952864 bytes received!

Verify the image .[ok]

CURRENT PRODUCT INFORMATION :

PRODUCT ID: 0x20110050

PRODUCT DESCRIPTION: N/A

SUCCESS: UPGRADING OK. ------> 传输成功

5、加载主程序

BootLoader>load ------>加载主程序

Loading main program ...

Loading main program 'rgos.bin'.

Load main program successfully.