交换机
园区网交换机
数据中心与云计算交换机
中小网络精简型交换机
工业交换机
意图网络指挥官
无线
放装型无线接入点
墙面型无线接入点
智分无线接入点
室外无线接入点
场景化无线
无线控制器
小锐A系列
统一运维
身份管理
服务产品
运营商
政府
金融
互联网
电力能源
制造业
高教/职教
医疗卫生
交通
地产酒店文旅·连锁服务
公共安全
在单机模式下插入M8600-VSU-02XFP模块时,线卡无法识别,已经确认引擎,线卡版本一致,出现如下提示:
Ruijie#
*Nov 1 15:19:37: %DP-5-CARD_NOT_SUPPORT: M8600-VSU-02XFP is not supported in the standalone mode, please switch to the vsu mode.
*Nov 1 15:20:05: %DP-3-LINECARD_STARTUP_FAIL: Module in slot 4 has translated to cannot startup.
Ruijie#show ver slots
Dev Slot Port Configured Module Online Module User Status Software Status
--- ---- ---- ---------------------------- ---------------------------- ------------ ---------------
1 1 0 none none none none
1 2 24 M8600-24GT/12SFP M8600-24GT/12SFP installed ok
1 3 0 none none none none
1 4 2 M8600-VSU-02XFP none installed none
1 M1 0 N/A M8606-CM II N/A master
1 M2 0 N/A none N/A none
这是一个正常提示,无需做任何其他操作,因为非VSU模式下,S86无法正确识别M8600-VSU-02XFP线卡,只要按照正常的vsu配置进行设置,切换到VSU模式就可以了,如下:
Ruijie(config)#switch virtual domain 1
Ruijie(config-vs-domain)#switch 1
Ruijie(config-vs-domain)#switch 1 priority 200
Ruijie(config-vs-domain)#end
Ruijie#wr
Building configuration...
Write to boot config file: [/config.text]
[OK]
Ruijie#
Ruijie#switch convert mode virtual
This command will copy the startup configuration to the backup file named "standalone.text",
save the running config to startup config and reload the switch.
Do you want to proceed? [y/n]:y
Copying the startup configuration to the backup file named "standalone.text" ...
[OK]
起来后就能正常识别线卡了